36. System Setup

The System Setup is used to define different system setups. In this version it is used to setup the Active Directory, SMTP parameters, and to load new masking rules.

Active Directory configuration

This configuration is optional. Enable it only if Active Directory authentication is needed.

1. Fill the details:
   
   

   Open

   

    

   Server Name/IP - the network name of the Active Directory controller
   Port - LDAP port of the Active Directory, usually 389
   Authentication Type - read-only, always Simple
   AD Domain Name - the name of the Active Directory domain
   Bind Username - sample username to test the connection
   Bind Password - password of the sample username to test the connection

   Click Test AD to verify that the active directory settings are correct.

2. Click Save.

To setup the SMTP server

This configuration is optional.

1. Click STMP.

2. Fill in the details to setup the STMP sever.
   
   

   Open

   

    

3. Click Test Email to verify that the STMP server settings are correct.

4. Click Save.

To install new built-in masking rules online:

1. Click Masking Rules.
   
   

    

2. Click on the File.

3. Select file.

4. Click Upload File.

To modify the sensitive search threshold:

1. Click SDS.

    

2. Enter the new threshold.

3. Click Save.